Description
Features, benefits and product information
Protect P1 Black Roof Coating 5kg
Protect P1 is a fibre reinforced roof coating for general maintenance and repair work. Its high-build, solvent-based acrylic formula helps bridge small gaps and cracks to form a continuous waterproof barrier. The coating is water resistant immediately after application.
The label lists flat and pitched roofs, weathered asphalt, bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt, and galvanised or ferrous metal as suitable surfaces. Check the condition of the roof and the suitability of the coating before starting work.
Why choose Protect P1?
- Black, high-build finish
- Reinforcing fibres help bridge small gaps and cracks
- Water resistant immediately after application
- One-coat application with a brush, roller or squeegee
Coverage and application
Apply at approximately 1–2kg per m². A 5kg tin covers an estimated 2.5–5m², depending on surface condition and porosity.
Prepare a clean, dry surface free from loose debris, moss, lichen, dirt, grease and standing water. Stir thoroughly before and during use, then apply generously and evenly to form a continuous coating. The label states that most roofing substrates do not require a primer.
Apply at 5°C to 25°C. The coating is touch dry in 3–4 hours and reaches full cure in 6–7 days. Read the full label and safety instructions before use.



